Water rotary spray paint room Factory – Automatic powder spraying production coating line – Jinming
Water rotary spray paint room Factory – Automatic powder spraying production coating line – Jinming Detail:
Introduction
This is a set of economical big cyclone two stage recovery and dusting system, powder recovery efficiency is high, cleaning and changing color is convenient and fast, the equipment is durable.
Spray room side plate and roof adopts stainless steel plate, spray room design has 4 automatic gun openings, spray gun using erect cloth gun. The system is equipped with two manual injection stations for online detection and manual injection of complex workpieces.
Big cyclone adopts European technology, single separation rate can reach 95%-98%.
After the filter adopts rotary wing type filter element recovery, high efficiency, low noise. The equipment is equipped with automatic recovery and screening system to ensure the normal pollution-free circulation of powder.
The filter element adopts GE film coated filter element from the United States, the filter precision can reach 99.99%, and the tail gas can be directly discharged to the workshop. At the same time, the nanoscale PTFE film covered by the membrane filter element can prevent micro powder from entering the inner filter material, ensure that the filter element is easy to clean, theoretically can ensure the permanent use of the filter element.
The bottom of the spray room is equipped with pulse air flow automatic cleaning system to ensure the timely recovery of the powder.
Convenient cleaning uses the following advanced technology
1. The two-stage recovery system of single pipe cyclone is adopted, which is currently recognized as the fastest recovery system in China.
2. The cone tube under the cyclone is connected with the hinge type fastener, which is convenient to move and clean.
3. Spray room adopts arc roof structure, easy to clean.
4. Using round stainless steel powder barrel, easy to disassemble and clean.
System configuration man-machine interface, convenient operation, parameter setting and maintenance: friendly Chinese man-machine interface, parameter setting, alarm information prompt, maintenance prompt, password protection and other functions. Thus make the whole equipment simple operation, convenient maintenance.
Used for all kinds of workpiece painting, other models can be customized.
Product detail pictures:
Related Product Guide:
We insist on offering premium quality creation with very good company concept, honest product sales along with the finest and fast assistance. it will bring you not only the premium quality item and huge profit, but the most significant is to occupy the endless market for Water rotary spray paint room Factory – Automatic powder spraying production coating line – Jinming , The product will supply to all over the world, such as: Curacao, Wellington, Czech Republic, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We have tightened inspection for quality of product.
By Miriam from Kuwait - 2017.05.02 18:28
The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
By Rose from Iraq - 2018.06.19 10:42
Related products
-
China Diy Woodworking Dust Collection Supplier ...
Introduction Cyclone dust collector is a kind of dust removal device. The dedusting mechanism is to make the dust-bearing air flow rotate, the dust particles are separated from the air flow by centrifugal force and collected on the wall of the device, and then the dust particles fall into the dust hopper by gravity. Each component of cyclone dust collector has a certain size proportion, and the change of each proportion relation can affect the efficiency and pressure loss of cyclone dust...
-
High Quality Artificial Powder Spraying Line Fa...
Introduction According to the properties of coating production, it can be divided into intermittent production and continuous production. Intermittent production spray room is mainly used for single or small batch of workpiece painting operation, can also be used for large batch of small workpiece painting operation. Its form according to the workpiece placement way has the table, the suspension type, the table mobile three. Intermittent production of spray room for semi-open, continuous...
-
China Downlight Dust Catcher – Zeolite ...
Basic principles The basic principle of zeolite wheel structure The concentration zone of zeolite runner can be divided into treatment zone, regeneration zone and cooling zone. The concentration runner runs continuously in each zone. VOC organic exhaust gas passes through the pre-filter and through the treatment area of the concentrator runner unit. In the treatment area, VOCs are removed by adsorbent adsorption, and the purified air is discharged from the treatment range of the co...
-
China Electrophoresis Coating Suppliers –...
Description of the main structure of the spray paint room The paint room is composed of chamber body, lighting device, air filtration system, air supply system, exhaust system, paint mist treatment system, electric control system, safety protection device and so on. The chamber body Paint chamber chamber body is fully closed structure, mainly composed of wall panels, workpiece entry, pedestrian safety door and bottom grille. Chamber body strength, stability, impact resistance, shoc...
-
China Best Woodworking Dust Collection System F...
Introduction PL series single machine dust removal equipment is the domestic more dust removal equipment, the equipment by fan, filter type filter, dust collector trinity. The filter barrel of the PL single-machine bag filter is made of imported polyester fiber, which has many advantages such as high dust removal efficiency, fine dust collection, small size, convenient installation and maintenance, long service life and so on. PL series single machine dust collector in the equipment...
-
Electrophoresis Line Factory – Dusting ...
Introduction Coating production line mainly by pretreatment electrophoresis line (electrophoretic paint is the earliest developed water-based coating, its main characteristics are high coating efficiency, economic safety, less pollution, can achieve complete automation management. Pretreatment is required before coating electrophoretic paint), sealing bottom coating line, middle coating line, surface coating line, finishing line and its drying system. The whole conveying system of the pa...
