Spraying A Room With Paint Supplier – Hardware parts dusting production line – Jinming
Spraying A Room With Paint Supplier – Hardware parts dusting production line – Jinming Detail:
Working principle
Working principle: the workpiece powder spraying is electrostatic spraying, the scattered powder can be recovered and reused, so the powder recovery device is set on the side of the powder room. The system adopts the two-stage recovery mode of big cyclone + filter element, which is attracted by the exhaust fan. Some ultrafine powder is filtered when flowing through the filter element with the airflow, and then discharged from the workshop with the discharged air.
1. The powder spraying room is processed with galvanized steel plate of δ1.5mm, and the panels are connected with bolts after folding to ensure that the panels are smooth and crisp; D =120mm strip opening is arranged at the top of the chamber body to make the suspension conveying system run outside the chamber without being polluted by dust.
2. A set of lighting lamps is set on both sides of the powder chamber body, and the lamps are 40W×2 double tube triple anti-fluorescent lamp, which is installed on the top of the operating port.
The powder room is equipped with a set of recovery device, recovery method is big cyclone + filter dual-stage recovery, mainly including big cyclone, filter element, pulse solenoid valve and pulse controller, powder collection box, exhaust fan, etc.; Exhaust fan selection OF BTHF-№630A centrifugal fan, the main technical parameters of the fan: air volume 15500 m³/h, full pressure 2000Pa, speed 2900r/min, motor power 18.5kW.
3. Spraying device
Powder room is equipped with 2 sets of manual spraying machine, high voltage electrostatic spraying machine made in Shanghai spraying machine.
4. Powder room partition: (optional)
During powder spraying, the scattered dust will pollute the surrounding environment to some degree, so a powder room is set up to close and partition, and the workpiece passing through is made into a imitation door. The partition wall is arranged with appropriate glass Windows for lighting, and the partition wall is made of δ50mm rock wool sandwich color board and single layer color board, with beautiful appearance.
According to the workpiece size, other models can be customized.
Product detail pictures:
Related Product Guide:
With reliable excellent approach, great name and ideal consumer services, the series of products and solutions produced by our company are exported to many countries and regions for Spraying A Room With Paint Supplier – Hardware parts dusting production line – Jinming , The product will supply to all over the world, such as: Buenos Aires, Turkey, Frankfurt, With a fully integrated operation system, our company has won a good fame for our high quality goods, reasonable prices and good services. Meanwhile, we have established a strict quality management system conducted in material incoming, processing and delivery. Abiding by the principle of "Credit first and customer supremacy", we sincerely welcome clients from home and abroad to cooperate with us and advance together to create a brilliant future.
By Mary from Bulgaria - 2018.08.12 12:27
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By King from Mecca - 2017.11.01 17:04
Related products
-
High Quality Water Tank Coating Systems Factory...
Introduction The equipment is used for the vehicle sealing inspection, rain, dry room for through type. The water is continuously pumped into the main pipeline from the reservoir, through pressure regulation and flow regulation into the rain pipeline, shot to the surface of the car body through the nozzle, the ejected water is collected into the reservoir, after precipitation filtration, recycling. During the inspection, all doors and Windows are closed, and the driver drives the car in ...
-
China Recycling Method Factories – Zeol...
Basic principles The basic principle of zeolite wheel structure The concentration zone of zeolite runner can be divided into treatment zone, regeneration zone and cooling zone. The concentration runner runs continuously in each zone. VOC organic exhaust gas passes through the pre-filter and through the treatment area of the concentrator runner unit. In the treatment area, VOCs are removed by adsorbent adsorption, and the purified air is discharged from the treatment range of the co...
-
High Quality Thermal Spray Powder Supplier R...
Introduction Water spray paint room, also known as Wenshi spray paint room, is to solve the water circulation system of the original water spray paint room often blocked. After the outdoor air is purified by the filter material at the top of the spray room, it enters the spray room, flows through the workpiece and the operator from top to bottom, and then the exhaust gas containing particulate matter generated in the work is quickly led to the water rotor below the floor grid due to the ...
-
High Quality Coating Production Line Factories ...
Introduction This is a set of economical big cyclone two stage recovery and dusting system, powder recovery efficiency is high, cleaning and changing color is convenient and fast, the equipment is durable. Spray room side plate and roof adopts stainless steel plate, spray room design has 4 automatic gun openings, spray gun using erect cloth gun. The system is equipped with two manual injection stations for online detection and manual injection of complex workpieces. Big cyclone adopts Eu...
-
Paint Spraying A Room Factory – Dusting...
Introduction Coating production line mainly by pretreatment electrophoresis line (electrophoretic paint is the earliest developed water-based coating, its main characteristics are high coating efficiency, economic safety, less pollution, can achieve complete automation management. Pretreatment is required before coating electrophoretic paint), sealing bottom coating line, middle coating line, surface coating line, finishing line and its drying system. The whole conveying system of the pa...
-
China Coating Equipment Factory – Integ...
The chamber body The chamber body is composed of skeleton, wall panel, electric rolling curtain door, lighting system, safety side door and other parts. The chamber body is through type, the whole chamber body skeleton structure is welded into one, forming a steel frame structure, and through anti-rust treatment; The chamber wall panel is assembled structure, all the panels are made of 1.2mm galvanized sheet folding assembly; The wrapping Angle is the whole galvanized sheet bending formi...
