High Quality Spray Paint In Room Factories – Automatic powder spraying production coating line – Jinming
High Quality Spray Paint In Room Factories – Automatic powder spraying production coating line – Jinming Detail:
Introduction
This is a set of economical big cyclone two stage recovery and dusting system, powder recovery efficiency is high, cleaning and changing color is convenient and fast, the equipment is durable.
Spray room side plate and roof adopts stainless steel plate, spray room design has 4 automatic gun openings, spray gun using erect cloth gun. The system is equipped with two manual injection stations for online detection and manual injection of complex workpieces.
Big cyclone adopts European technology, single separation rate can reach 95%-98%.
After the filter adopts rotary wing type filter element recovery, high efficiency, low noise. The equipment is equipped with automatic recovery and screening system to ensure the normal pollution-free circulation of powder.
The filter element adopts GE film coated filter element from the United States, the filter precision can reach 99.99%, and the tail gas can be directly discharged to the workshop. At the same time, the nanoscale PTFE film covered by the membrane filter element can prevent micro powder from entering the inner filter material, ensure that the filter element is easy to clean, theoretically can ensure the permanent use of the filter element.
The bottom of the spray room is equipped with pulse air flow automatic cleaning system to ensure the timely recovery of the powder.
Convenient cleaning uses the following advanced technology
1. The two-stage recovery system of single pipe cyclone is adopted, which is currently recognized as the fastest recovery system in China.
2. The cone tube under the cyclone is connected with the hinge type fastener, which is convenient to move and clean.
3. Spray room adopts arc roof structure, easy to clean.
4. Using round stainless steel powder barrel, easy to disassemble and clean.
System configuration man-machine interface, convenient operation, parameter setting and maintenance: friendly Chinese man-machine interface, parameter setting, alarm information prompt, maintenance prompt, password protection and other functions. Thus make the whole equipment simple operation, convenient maintenance.
Used for all kinds of workpiece painting, other models can be customized.
Product detail pictures:
Related Product Guide:
We insist about the theory of growth of 'High excellent, Performance, Sincerity and Down-to-earth working approach' to offer you with great company of processing for High Quality Spray Paint In Room Factories – Automatic powder spraying production coating line – Jinming , The product will supply to all over the world, such as: Anguilla, Lahore, Afghanistan, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we're trying our best to be your good partner.
By Dawn from kazan - 2018.07.27 12:26
High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
By Meredith from Sri Lanka - 2017.12.19 11:10
Related products
-
China Metal Dust Collector Factory – Wh...
Introduction Cyclone dust collector is a kind of dust removal device. The dedusting mechanism is to make the dust-bearing air flow rotate, the dust particles are separated from the air flow by centrifugal force and collected on the wall of the device, and then the dust particles fall into the dust hopper by gravity. Each component of cyclone dust collector has a certain size proportion, and the change of each proportion relation can affect the efficiency and pressure loss of cyclone dust...
-
High Quality Wipe Room Factories – Dust...
Introduction Coating production line mainly by pretreatment electrophoresis line (electrophoretic paint is the earliest developed water-based coating, its main characteristics are high coating efficiency, economic safety, less pollution, can achieve complete automation management. Pretreatment is required before coating electrophoretic paint), sealing bottom coating line, middle coating line, surface coating line, finishing line and its drying system. The whole conveying system of the pa...
-
Dust Filtration Systems Suppliers – RTO...
Introduction RT0 is also known as regenerative heating garbage incinerator, is a kind of environmental protection machinery that depends on heat energy to immediately ignite the waste gas, which can solve the waste gas in spraying, painting, packaging and printing, plastics, chemical plants, electrophoresis principle, spraying, electronic devices and other basically all fields. For the waste gas with the concentration value in the range of 100-3500mg /m3, RTO has the practical effect tha...
-
High Quality Zeolite Adsorption Supplier –...
Introduction RT0 is also known as regenerative heating garbage incinerator, is a kind of environmental protection machinery that depends on heat energy to immediately ignite the waste gas, which can solve the waste gas in spraying, painting, packaging and printing, plastics, chemical plants, electrophoresis principle, spraying, electronic devices and other basically all fields. For the waste gas with the concentration value in the range of 100-3500mg /m3, RTO has the practical effect tha...
-
Phosphate Wash Before Powder Coating Factory &#...
Introduction This is a set of economical big cyclone two stage recovery and dusting system, powder recovery efficiency is high, cleaning and changing color is convenient and fast, the equipment is durable. Spray room side plate and roof adopts stainless steel plate, spray room design has 4 automatic gun openings, spray gun using erect cloth gun. The system is equipped with two manual injection stations for online detection and manual injection of complex workpieces. Big cyclone adopts Eu...
-
High Quality Powder Coat Repair Spray Suppliers...
Working principle Working principle: the workpiece powder spraying is electrostatic spraying, the scattered powder can be recovered and reused, so the powder recovery device is set on the side of the powder room. The system adopts the two-stage recovery mode of big cyclone + filter element, which is attracted by the exhaust fan. Some ultrafine powder is filtered when flowing through the filter element with the airflow, and then discharged from the workshop with the discharged air. 1. The...
