High Quality Phosphate Pretreatment Factories – Automatic powder spraying production coating line – Jinming
High Quality Phosphate Pretreatment Factories – Automatic powder spraying production coating line – Jinming Detail:
Introduction
This is a set of economical big cyclone two stage recovery and dusting system, powder recovery efficiency is high, cleaning and changing color is convenient and fast, the equipment is durable.
Spray room side plate and roof adopts stainless steel plate, spray room design has 4 automatic gun openings, spray gun using erect cloth gun. The system is equipped with two manual injection stations for online detection and manual injection of complex workpieces.
Big cyclone adopts European technology, single separation rate can reach 95%-98%.
After the filter adopts rotary wing type filter element recovery, high efficiency, low noise. The equipment is equipped with automatic recovery and screening system to ensure the normal pollution-free circulation of powder.
The filter element adopts GE film coated filter element from the United States, the filter precision can reach 99.99%, and the tail gas can be directly discharged to the workshop. At the same time, the nanoscale PTFE film covered by the membrane filter element can prevent micro powder from entering the inner filter material, ensure that the filter element is easy to clean, theoretically can ensure the permanent use of the filter element.
The bottom of the spray room is equipped with pulse air flow automatic cleaning system to ensure the timely recovery of the powder.
Convenient cleaning uses the following advanced technology
1. The two-stage recovery system of single pipe cyclone is adopted, which is currently recognized as the fastest recovery system in China.
2. The cone tube under the cyclone is connected with the hinge type fastener, which is convenient to move and clean.
3. Spray room adopts arc roof structure, easy to clean.
4. Using round stainless steel powder barrel, easy to disassemble and clean.
System configuration man-machine interface, convenient operation, parameter setting and maintenance: friendly Chinese man-machine interface, parameter setting, alarm information prompt, maintenance prompt, password protection and other functions. Thus make the whole equipment simple operation, convenient maintenance.
Used for all kinds of workpiece painting, other models can be customized.
Product detail pictures:
Related Product Guide:
Our enterprise aims to operating faithfully, serving to all of our prospects , and working in new technology and new machine frequently for High Quality Phosphate Pretreatment Factories – Automatic powder spraying production coating line – Jinming , The product will supply to all over the world, such as: Belgium, United States, Muscat, Meanwhile, we're building up and consummating triangle market & strategic cooperation in order to achieve a multi-win trade supply chain to expand our market vertically and horizontally for a brighter prospects. development. Our philosophy is to create cost-effective products and solutions, promote perfect services, cooperate for long-term and mutual benefits, firm a in depth mode of excellent suppliers system and marketing agents, brand strategic cooperation sales system.
By Lisa from belarus - 2018.10.31 10:02
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Karl from Spain - 2018.12.28 15:18
Related products
-
platform lorry Factories – Hardware pa...
Working principle Working principle: the workpiece powder spraying is electrostatic spraying, the scattered powder can be recovered and reused, so the powder recovery device is set on the side of the powder room. The system adopts the two-stage recovery mode of big cyclone + filter element, which is attracted by the exhaust fan. Some ultrafine powder is filtered when flowing through the filter element with the airflow, and then discharged from the workshop with the discharged air. 1. The...
-
High Quality Power Plant Waste Gas Treatment Ex...
Introduction Workshop is engaged in the production operation will poduce the harmful gas such as stimulation of pollutants, to nature ecology and plant environmental hazards can cause air pollution, waste gas emissions from the equipment will be collected, the use of activated carbon adsorption tower will be treated as waste gas to the air pollutant emission standards before discharge into the atmosphere, so as not to ause the harm of environment and staff. Activated carbon abs...
-
Overhead Dust Collector Exporters – RTO...
Introduction RT0 is also known as regenerative heating garbage incinerator, is a kind of environmental protection machinery that depends on heat energy to immediately ignite the waste gas, which can solve the waste gas in spraying, painting, packaging and printing, plastics, chemical plants, electrophoresis principle, spraying, electronic devices and other basically all fields. For the waste gas with the concentration value in the range of 100-3500mg /m3, RTO has the practical effect tha...
-
High Quality Vacuum Dust Collector – Fi...
Introduction PL series single machine dust removal equipment is the domestic more dust removal equipment, the equipment by fan, filter type filter, dust collector trinity. The filter barrel of the PL single-machine bag filter is made of imported polyester fiber, which has many advantages such as high dust removal efficiency, fine dust collection, small size, convenient installation and maintenance, long service life and so on. PL series single machine dust collector in the equipment...
-
China Fluorspar Wheel Supplier – Whirlw...
Introduction Cyclone dust collector is a kind of dust removal device. The dedusting mechanism is to make the dust-bearing air flow rotate, the dust particles are separated from the air flow by centrifugal force and collected on the wall of the device, and then the dust particles fall into the dust hopper by gravity. Each component of cyclone dust collector has a certain size proportion, and the change of each proportion relation can affect the efficiency and pressure loss of cyclone dust...
-
China Workshop Dust Extraction Systems Factorie...
Introduction RT0 is also known as regenerative heating garbage incinerator, is a kind of environmental protection machinery that depends on heat energy to immediately ignite the waste gas, which can solve the waste gas in spraying, painting, packaging and printing, plastics, chemical plants, electrophoresis principle, spraying, electronic devices and other basically all fields. For the waste gas with the concentration value in the range of 100-3500mg /m3, RTO has the practical effect tha...
