High Quality Industrial Waste Gas Treatment Factories – Activated carbon adsorption, desorption, catalytic combustion – Jinming
High Quality Industrial Waste Gas Treatment Factories – Activated carbon adsorption, desorption, catalytic combustion – Jinming Detail:
Introduction
Workshop is engaged in the production operation will poduce the harmful gas such as stimulation of pollutants, to nature ecology and plant environmental hazards can cause air pollution, waste gas emissions from the equipment will be collected, the use of activated carbon adsorption tower will be treated as waste gas to the air pollutant emission standards before discharge into the atmosphere, so as not to ause the harm of environment and staff.
Activated carbon absorption, stripping, catalytic combustion is one of my company a new generation of VOCs processing equipment, is the element of adsorptive enrichment and thermal oxidation unit a organically, mainly is suitable for the low concentration organic gases and should not be used directly or catalytic combustion method and adsorption method of recycling treatment of organic waste gas, especially for large volume processing, Satisfactory economic and social effects can be obtained. After adsorption, purification and desistation, it is converted into organic waste gas with small air volume and high concentration, which is treated by thermal oxidation, and the heat released by the combustion of organic matter is utilized.
Technical characteristics of activated carbon adsorption and desorption catalytic combustion device
1. Adsorption purification, stable treatment effect, to ensure that the exhaust gas discharge standards.
2. With manual and automatic desorption function, the choice of precious metal catalyst, through catalytic combustion reaction will be organic matter conversion, catalytic.
3. Adopt PLC control, supporting can operate touch screen, easy to operate, simple maintenance and management.
4. With multiple measures, the main reactor is equipped with explosion relief device, set up multi-point temperature detection, with fault alarm and emergency treatment ability.
Suitable for all kinds of industrial waste gas treatment
Product detail pictures:
Related Product Guide:
Innovation, excellent and reliability are the core values of our firm. These principles today more than ever form the basis of our success as an internationally active mid-size corporation for High Quality Industrial Waste Gas Treatment Factories – Activated carbon adsorption, desorption, catalytic combustion – Jinming , The product will supply to all over the world, such as: Tajikistan, Singapore, Jordan, During the development, our company has built a well-known brand. It is well highly acclaimed by our customers. OEM and ODM are accepted. We are looking forward to customers from all over the world to join us to a wild cooperation.
By Dorothy from Greek - 2018.08.12 12:27
We have worked with many companies, but this time is the best，detailed explanation, timely delivery and quality qualified, nice!
By Ruby from Nairobi - 2017.09.28 18:29
Related products
-
High Quality Water Tank Coating Systems Factory...
Introduction The equipment is used for the vehicle sealing inspection, rain, dry room for through type. The water is continuously pumped into the main pipeline from the reservoir, through pressure regulation and flow regulation into the rain pipeline, shot to the surface of the car body through the nozzle, the ejected water is collected into the reservoir, after precipitation filtration, recycling. During the inspection, all doors and Windows are closed, and the driver drives the car in ...
-
China Sublimation Coating Powder Suppliers R...
Working principle Working principle: the workpiece powder spraying is electrostatic spraying, the scattered powder can be recovered and reused, so the powder recovery device is set on the side of the powder room. The system adopts the two-stage recovery mode of big cyclone + filter element, which is attracted by the exhaust fan. Some ultrafine powder is filtered when flowing through the filter element with the airflow, and then discharged from the workshop with the discharged air. 1. The...
-
High Quality Best Dust Collection System –...
Introduction Cyclone dust collector is a kind of dust removal device. The dedusting mechanism is to make the dust-bearing air flow rotate, the dust particles are separated from the air flow by centrifugal force and collected on the wall of the device, and then the dust particles fall into the dust hopper by gravity. Each component of cyclone dust collector has a certain size proportion, and the change of each proportion relation can affect the efficiency and pressure loss of cyclone dust...
-
High Quality Best Dust Collector For Small Shop...
Basic principles The basic principle of zeolite wheel structure The concentration zone of zeolite runner can be divided into treatment zone, regeneration zone and cooling zone. The concentration runner runs continuously in each zone. VOC organic exhaust gas passes through the pre-filter and through the treatment area of the concentrator runner unit. In the treatment area, VOCs are removed by adsorbent adsorption, and the purified air is discharged from the treatment range of the co...
-
Automobile Cab Electrophoresis Production Line ...
Working principle Working principle: the workpiece powder spraying is electrostatic spraying, the scattered powder can be recovered and reused, so the powder recovery device is set on the side of the powder room. The system adopts the two-stage recovery mode of big cyclone + filter element, which is attracted by the exhaust fan. Some ultrafine powder is filtered when flowing through the filter element with the airflow, and then discharged from the workshop with the discharged air. 1. The...
-
High Quality Flame Spray Powder Coating System ...
Introduction Water spray paint room, also known as Wenshi spray paint room, is to solve the water circulation system of the original water spray paint room often blocked. After the outdoor air is purified by the filter material at the top of the spray room, it enters the spray room, flows through the workpiece and the operator from top to bottom, and then the exhaust gas containing particulate matter generated in the work is quickly led to the water rotor below the floor grid due to the ...
