Drying Equipment Factories – High temperature powder curing bridge drying furnace-jm-900 – Jinming
Drying Equipment Factories – High temperature powder curing bridge drying furnace-jm-900 – Jinming Detail:
Equipment composition description
1. Chamber Body
The chamber body is through type, the column and beam in the chamber body are welded with section steel to meet the load-bearing requirements of the chamber body and the workpiece. The inner plate of the chamber is made of 1.2mm high quality galvanized steel plate, the outer wall is made of 0.6mm galvanized corrugated steel plate, and the inner skeleton is made of U-shaped steel, Angle steel and galvanized steel plate. The thickness of the insulation layer of the chamber wall and bottom plate is 100mm, and the dissolved weight of the rock wool filled in the middle is 80Kg/m3. The integral insulation wall and roof are adopted, and the gaps between the boards are fully welded to form a fully sealed internal structure.
The whole heating unit is installed on the platform at the top of the chamber body, which adopts the steel frame and lays the pattern plate at the same time.
The chamber body is floor structure to prevent hot steam spillover, the entrance and exit of the drying room is equipped with electric sliding door, the door is closed during drying operation.
The greenhouse body is a modular structure, and an expansion joint is arranged in the middle of the whole length, which can compensate the thermal expansion displacement of the inner wall shell.
The chamber body of the drying furnace adopts convection heating, and the hot air enters the inner cavity through the tuyere and blows into the channel. The return air adopts adjustable air plate to balance the air volume and pressure.
A temperature sensor is arranged on the top of the chamber body to detect the temperature of each working area in the room.
2. Heating system
The gas hot blast stove consists of furnace body, combustion chamber, combustion machine, fan, filter device and other parts.
The gas heating indirect gas heating method, it is through the combustion machine in the stainless steel heat energy conversion device combustion, and then through the high temperature induced draft fan and circulation pipe, the hot air transported to the furnace heating, so that the cycle reciprocating heating air, so that the powder curing furnace to achieve the required hot air value.
Heat energy converter is made of high temperature resistant stainless steel plate (2 ~ 3mm), the cavity is the introduction of foreign advanced technology, through CAD design, with fast heating, long service life and other advantages. The inner plate of hot blast stove is galvanized steel plate with high temperature resistance and aging resistance. The outer plate is cold rolled steel plate with high quality. The inner and outer wall panels are filled with δ150mm rock wool for insulation.
Hot air circulation fan adopts national high quality products, impeller adopts temperature resistant material, with high temperature resistance, low noise, balanced operation and other characteristics. The bearing of fan adopts air-cooled refueling cooling mode to ensure smooth convection circulation of hot air and heat balance in the dry passage.
GCF type high temperature fan is used for hot air circulation fan.
The powder furnace is continuously adjustable in the range of 180 ~ 220℃, and can adapt to fast shutdown. The time to close the circulating fan is not more than 30 minutes after the burner stops burning.
The high efficiency filter system adopts high temperature resistant high efficiency filter, which is installed between the fan suction outlet and the heat exchanger. It adopts “W” movable removable installation mode, with access door left on the side for easy cleaning and installation.
The fresh air outlet is located on the inlet side of the box body, and the tuyere is 350×350. It is equipped with high efficiency filter screen and air volume adjustment device. The whole fresh air can be adjusted to ensure the fresh air in the furnace. Advantages Excellent thermal insulation performance.
Used for all kinds of workpiece painting, other models can be customized.
Product detail pictures:
Related Product Guide:
To create more benefit for buyers is our business philosophy; shopper growing is our working chase for Drying Equipment Factories – High temperature powder curing bridge drying furnace-jm-900 – Jinming , The product will supply to all over the world, such as: Namibia, Armenia, Ireland, They're durable modeling and promoting well all over the world. Under no circumstances disappearing key functions in a brief time, it's a should for you personally of fantastic quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the business make an awesome efforts to expand its international trade, raise its enterprise. rofit and improve its export scale. We are confident that we'll have a vibrant prospect and to be distributed all over the world in the years to come.
By Amy from Miami - 2018.06.19 10:42
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By Molly from Wellington - 2018.02.12 14:52
Related products
-
Painting Equipment Exporters – Auto aut...
Introduction According to the properties of coating production, it can be divided into intermittent production and continuous production. Intermittent production spray room is mainly used for single or small batch of workpiece painting operation, can also be used for large batch of small workpiece painting operation. Its form according to the workpiece placement way has the table, the suspension type, the table mobile three. Intermittent production of spray room for semi-open, continuous...
-
High Quality Epoxy Paint For Road Marking Suppl...
Introduction Water spray paint room, also known as Wenshi spray paint room, is to solve the water circulation system of the original water spray paint room often blocked. After the outdoor air is purified by the filter material at the top of the spray room, it enters the spray room, flows through the workpiece and the operator from top to bottom, and then the exhaust gas containing particulate matter generated in the work is quickly led to the water rotor below the floor grid due to the ...
-
China Diy Dust Separator Exporters – Wh...
Introduction Cyclone dust collector is a kind of dust removal device. The dedusting mechanism is to make the dust-bearing air flow rotate, the dust particles are separated from the air flow by centrifugal force and collected on the wall of the device, and then the dust particles fall into the dust hopper by gravity. Each component of cyclone dust collector has a certain size proportion, and the change of each proportion relation can affect the efficiency and pressure loss of cyclone dust...
-
China Paint Spraying A Room – Water rot...
Introduction Water spray paint room, also known as Wenshi spray paint room, is to solve the water circulation system of the original water spray paint room often blocked. After the outdoor air is purified by the filter material at the top of the spray room, it enters the spray room, flows through the workpiece and the operator from top to bottom, and then the exhaust gas containing particulate matter generated in the work is quickly led to the water rotor below the floor grid due to the ...
-
High Quality Heat Room Factories – Inte...
The chamber body The chamber body is composed of skeleton, wall panel, electric rolling curtain door, lighting system, safety side door and other parts. The chamber body is through type, the whole chamber body skeleton structure is welded into one, forming a steel frame structure, and through anti-rust treatment; The chamber wall panel is assembled structure, all the panels are made of 1.2mm galvanized sheet folding assembly; The wrapping Angle is the whole galvanized sheet bending formi...
-
High Quality Vacuum Dust Collector Factory R...
Introduction Workshop is engaged in the production operation will poduce the harmful gas such as stimulation of pollutants, to nature ecology and plant environmental hazards can cause air pollution, waste gas emissions from the equipment will be collected, the use of activated carbon adsorption tower will be treated as waste gas to the air pollutant emission standards before discharge into the atmosphere, so as not to ause the harm of environment and staff. Activated carbon abs...
