China Spraying A Room – Hardware parts dusting production line – Jinming
China Spraying A Room – Hardware parts dusting production line – Jinming Detail:
Working principle
Working principle: the workpiece powder spraying is electrostatic spraying, the scattered powder can be recovered and reused, so the powder recovery device is set on the side of the powder room. The system adopts the two-stage recovery mode of big cyclone + filter element, which is attracted by the exhaust fan. Some ultrafine powder is filtered when flowing through the filter element with the airflow, and then discharged from the workshop with the discharged air.
1. The powder spraying room is processed with galvanized steel plate of δ1.5mm, and the panels are connected with bolts after folding to ensure that the panels are smooth and crisp; D =120mm strip opening is arranged at the top of the chamber body to make the suspension conveying system run outside the chamber without being polluted by dust.
2. A set of lighting lamps is set on both sides of the powder chamber body, and the lamps are 40W×2 double tube triple anti-fluorescent lamp, which is installed on the top of the operating port.
The powder room is equipped with a set of recovery device, recovery method is big cyclone + filter dual-stage recovery, mainly including big cyclone, filter element, pulse solenoid valve and pulse controller, powder collection box, exhaust fan, etc.; Exhaust fan selection OF BTHF-№630A centrifugal fan, the main technical parameters of the fan: air volume 15500 m³/h, full pressure 2000Pa, speed 2900r/min, motor power 18.5kW.
3. Spraying device
Powder room is equipped with 2 sets of manual spraying machine, high voltage electrostatic spraying machine made in Shanghai spraying machine.
4. Powder room partition: (optional)
During powder spraying, the scattered dust will pollute the surrounding environment to some degree, so a powder room is set up to close and partition, and the workpiece passing through is made into a imitation door. The partition wall is arranged with appropriate glass Windows for lighting, and the partition wall is made of δ50mm rock wool sandwich color board and single layer color board, with beautiful appearance.
According to the workpiece size, other models can be customized.
Product detail pictures:
Related Product Guide:
We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for China Spraying A Room – Hardware parts dusting production line – Jinming , The product will supply to all over the world, such as: panama, Mecca, Luxemburg, With the enterprising spirit of" high efficiency, convenience, practicality and innovation", and in line with such serving guidance of "good quality but better price, " and "global credit", we've been striving to cooperate with the automobile parts companies all over the world to make a win-win partnership.
By Renee from Ecuador - 2018.12.30 10:21
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Nora from Czech republic - 2018.04.25 16:46
Related products
-
China Domestic Dust Collector Factories –...
Introduction Workshop is engaged in the production operation will poduce the harmful gas such as stimulation of pollutants, to nature ecology and plant environmental hazards can cause air pollution, waste gas emissions from the equipment will be collected, the use of activated carbon adsorption tower will be treated as waste gas to the air pollutant emission standards before discharge into the atmosphere, so as not to ause the harm of environment and staff. Activated carbon abs...
-
High Quality Sandblaster Dust Collector Supplie...
Introduction RT0 is also known as regenerative heating garbage incinerator, is a kind of environmental protection machinery that depends on heat energy to immediately ignite the waste gas, which can solve the waste gas in spraying, painting, packaging and printing, plastics, chemical plants, electrophoresis principle, spraying, electronic devices and other basically all fields. For the waste gas with the concentration value in the range of 100-3500mg /m3, RTO has the practical effect tha...
-
High Quality Electrophoresis Line – Spr...
Coating pretreatment includes degreasing (degreasing), rust removal, phosphating three parts. Phosphating is the central link, degreasing and rust removal is the preparation process before phosphating, so in production practice, we should not only take phosphating work as the focus, but also start from the requirements of phosphating quality, do a good job in addition to oil and rust removal, especially pay attention to the mutual influence between them. Degreasing derusting With th...
-
China Industrial Cyclone Dust Collector Factori...
Introduction Cyclone dust collector is a kind of dust removal device. The dedusting mechanism is to make the dust-bearing air flow rotate, the dust particles are separated from the air flow by centrifugal force and collected on the wall of the device, and then the dust particles fall into the dust hopper by gravity. Each component of cyclone dust collector has a certain size proportion, and the change of each proportion relation can affect the efficiency and pressure loss of cyclone dust...
-
High Quality Sublimation Coating Powder Supplie...
Introduction The equipment is used for the vehicle sealing inspection, rain, dry room for through type. The water is continuously pumped into the main pipeline from the reservoir, through pressure regulation and flow regulation into the rain pipeline, shot to the surface of the car body through the nozzle, the ejected water is collected into the reservoir, after precipitation filtration, recycling. During the inspection, all doors and Windows are closed, and the driver drives the car in ...
-
China Equipment Spray Suppliers – Water...
Introduction Water spray paint room, also known as Wenshi spray paint room, is to solve the water circulation system of the original water spray paint room often blocked. After the outdoor air is purified by the filter material at the top of the spray room, it enters the spray room, flows through the workpiece and the operator from top to bottom, and then the exhaust gas containing particulate matter generated in the work is quickly led to the water rotor below the floor grid due to the ...
