China Spray Painting Equipment Supplier – Hardware parts dusting production line – Jinming
China Spray Painting Equipment Supplier – Hardware parts dusting production line – Jinming Detail:
Working principle
Working principle: the workpiece powder spraying is electrostatic spraying, the scattered powder can be recovered and reused, so the powder recovery device is set on the side of the powder room. The system adopts the two-stage recovery mode of big cyclone + filter element, which is attracted by the exhaust fan. Some ultrafine powder is filtered when flowing through the filter element with the airflow, and then discharged from the workshop with the discharged air.
1. The powder spraying room is processed with galvanized steel plate of δ1.5mm, and the panels are connected with bolts after folding to ensure that the panels are smooth and crisp; D =120mm strip opening is arranged at the top of the chamber body to make the suspension conveying system run outside the chamber without being polluted by dust.
2. A set of lighting lamps is set on both sides of the powder chamber body, and the lamps are 40W×2 double tube triple anti-fluorescent lamp, which is installed on the top of the operating port.
The powder room is equipped with a set of recovery device, recovery method is big cyclone + filter dual-stage recovery, mainly including big cyclone, filter element, pulse solenoid valve and pulse controller, powder collection box, exhaust fan, etc.; Exhaust fan selection OF BTHF-№630A centrifugal fan, the main technical parameters of the fan: air volume 15500 m³/h, full pressure 2000Pa, speed 2900r/min, motor power 18.5kW.
3. Spraying device
Powder room is equipped with 2 sets of manual spraying machine, high voltage electrostatic spraying machine made in Shanghai spraying machine.
4. Powder room partition: (optional)
During powder spraying, the scattered dust will pollute the surrounding environment to some degree, so a powder room is set up to close and partition, and the workpiece passing through is made into a imitation door. The partition wall is arranged with appropriate glass Windows for lighting, and the partition wall is made of δ50mm rock wool sandwich color board and single layer color board, with beautiful appearance.
According to the workpiece size, other models can be customized.
Product detail pictures:
Related Product Guide:
Fast and superior quotations, informed advisers to help you choose the correct merchandise that suits all your requirements, a short generation time, responsible quality control and different services for paying and shipping affairs for China Spray Painting Equipment Supplier – Hardware parts dusting production line – Jinming , The product will supply to all over the world, such as: Marseille, Pretoria, Guatemala, All our staffs believe that: Quality builds today and service creates future. We know that good quality and the best service are the only way for us to achieve our customers and to achieve ourselves too. We welcome customers all over the word to contact us for future business relationships. Our products are the best. Once Selected, Perfect Forever!
By jari dedenroth from Honduras - 2018.08.12 12:27
Staff is skilled, well-equipped, process is specification, products meet the requirements and delivery is guaranteed, a best partner!
By Moira from Australia - 2018.09.29 13:24
Related products
-
China Best Budget Dust Collector Factories R...
Introduction PL series single machine dust removal equipment is the domestic more dust removal equipment, the equipment by fan, filter type filter, dust collector trinity. The filter barrel of the PL single-machine bag filter is made of imported polyester fiber, which has many advantages such as high dust removal efficiency, fine dust collection, small size, convenient installation and maintenance, long service life and so on. PL series single machine dust collector in the equipment...
-
China Environmental Protection Products Supplie...
Introduction Cyclone dust collector is a kind of dust removal device. The dedusting mechanism is to make the dust-bearing air flow rotate, the dust particles are separated from the air flow by centrifugal force and collected on the wall of the device, and then the dust particles fall into the dust hopper by gravity. Each component of cyclone dust collector has a certain size proportion, and the change of each proportion relation can affect the efficiency and pressure loss of cyclone dust...
-
China Microbe Tower Factory – Activated...
Introduction Workshop is engaged in the production operation will poduce the harmful gas such as stimulation of pollutants, to nature ecology and plant environmental hazards can cause air pollution, waste gas emissions from the equipment will be collected, the use of activated carbon adsorption tower will be treated as waste gas to the air pollutant emission standards before discharge into the atmosphere, so as not to ause the harm of environment and staff. Activated carbon abs...
-
Light Oxygen Catalyst Exporters – RTO r...
Introduction RT0 is also known as regenerative heating garbage incinerator, is a kind of environmental protection machinery that depends on heat energy to immediately ignite the waste gas, which can solve the waste gas in spraying, painting, packaging and printing, plastics, chemical plants, electrophoresis principle, spraying, electronic devices and other basically all fields. For the waste gas with the concentration value in the range of 100-3500mg /m3, RTO has the practical effect tha...
-
Ground Chain System Factory – Hardware ...
Working principle Working principle: the workpiece powder spraying is electrostatic spraying, the scattered powder can be recovered and reused, so the powder recovery device is set on the side of the powder room. The system adopts the two-stage recovery mode of big cyclone + filter element, which is attracted by the exhaust fan. Some ultrafine powder is filtered when flowing through the filter element with the airflow, and then discharged from the workshop with the discharged air. 1. The...
-
Diy Dust Extractor Exporters – Filter c...
Introduction PL series single machine dust removal equipment is the domestic more dust removal equipment, the equipment by fan, filter type filter, dust collector trinity. The filter barrel of the PL single-machine bag filter is made of imported polyester fiber, which has many advantages such as high dust removal efficiency, fine dust collection, small size, convenient installation and maintenance, long service life and so on. PL series single machine dust collector in the equipment...
