China Exhaust Gas Treatment Equipment Factories – Zeolite wheel adsorption concentration – Jinming
China Exhaust Gas Treatment Equipment Factories – Zeolite wheel adsorption concentration – Jinming Detail:
Basic principles
The basic principle of zeolite wheel structure
The concentration zone of zeolite runner can be divided into treatment zone, regeneration zone and cooling zone. The concentration runner runs continuously in each zone.
VOC organic exhaust gas passes through the pre-filter and through the treatment area of the concentrator runner unit. In the treatment area, VOCs are removed by adsorbent adsorption, and the purified air is discharged from the treatment range of the concentration wheel.
Adsorbed in the concentration of organic exhaust gas VOCs in the runner, in the regeneration area by hot air treatment and desorbed, concentrated to 5-15 times the degree.
The condensing runner is cooled in the cooling area, and then heated by the air in the cooling area is used as recycled air to achieve the effect of energy saving.
Zeolite runner equipment features
1. High adsorption and desorption efficiency.
2. Zeolite runner adsorption VOCs produced by the pressure drop is very low, can greatly reduce power consumption.
3. Make the original high air volume, low concentration of VOCs exhaust gas, converted into low air volume, high concentration of exhaust gas, concentration of 5-20 times, greatly reduce the post-treatment equipment specifications, lower operating cost.
4. The overall system adopts modular design, with minimum space requirements, and provides continuous and unmanned control mode.
5. System automation control, single button start, simple operation, and can be matched with man-machine interface monitoring important operation data.
Zeolite runner and honeycomb activated carbon adsorption concentration device comparison: zeolite content directly determines the adsorption efficiency, so the zeolite content is very important. The purity of zeolite is as high as 90%.
Suitable for all kinds of industrial waste gas treatment
Product detail pictures:
Related Product Guide:
abide by the contract", conforms into the market requirement, joins in the market competition by its good quality also as provides a lot more comprehensive and great company for purchasers to let them turn into huge winner. The pursue from the firm, would be the clients' gratification for China Exhaust Gas Treatment Equipment Factories – Zeolite wheel adsorption concentration – Jinming , The product will supply to all over the world, such as: Canada, Croatia, Libya, All the imported machines effectively control and guarantee the machining precision for the items. Besides, we have a group of high-quality management personnels and professionals, who make the high-quality items and have the ability to develop new merchandise to expand our market home and abroad. We sincerely expect customers come for a blooming business for both of us.
By Ella from Ghana - 2018.10.01 14:14
The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
By Mildred from Moscow - 2018.12.14 15:26
Related products
-
China Thermal Spray Powder Suppliers Exporters ...
Introduction According to the properties of coating production, it can be divided into intermittent production and continuous production. Intermittent production spray room is mainly used for single or small batch of workpiece painting operation, can also be used for large batch of small workpiece painting operation. Its form according to the workpiece placement way has the table, the suspension type, the table mobile three. Intermittent production of spray room for semi-open, continuous...
-
High Quality Pretreatment Electrophoresis Facto...
Coating pretreatment includes degreasing (degreasing), rust removal, phosphating three parts. Phosphating is the central link, degreasing and rust removal is the preparation process before phosphating, so in production practice, we should not only take phosphating work as the focus, but also start from the requirements of phosphating quality, do a good job in addition to oil and rust removal, especially pay attention to the mutual influence between them. Degreasing derusting With th...
-
Electrophoresis Equipment Supplier – Wa...
Introduction Water spray paint room, also known as Wenshi spray paint room, is to solve the water circulation system of the original water spray paint room often blocked. After the outdoor air is purified by the filter material at the top of the spray room, it enters the spray room, flows through the workpiece and the operator from top to bottom, and then the exhaust gas containing particulate matter generated in the work is quickly led to the water rotor below the floor grid due to the ...
-
China Spraying A Room With Paint Suppliers R...
Introduction This is a set of economical big cyclone two stage recovery and dusting system, powder recovery efficiency is high, cleaning and changing color is convenient and fast, the equipment is durable. Spray room side plate and roof adopts stainless steel plate, spray room design has 4 automatic gun openings, spray gun using erect cloth gun. The system is equipped with two manual injection stations for online detection and manual injection of complex workpieces. Big cyclone adopts Eu...
-
Powder Coating Production Line Factory – ...
Introduction Water spray paint room, also known as Wenshi spray paint room, is to solve the water circulation system of the original water spray paint room often blocked. After the outdoor air is purified by the filter material at the top of the spray room, it enters the spray room, flows through the workpiece and the operator from top to bottom, and then the exhaust gas containing particulate matter generated in the work is quickly led to the water rotor below the floor grid due to the ...
-
China Spray Painting Supplies Factories –...
Introduction The equipment is used for the vehicle sealing inspection, rain, dry room for through type. The water is continuously pumped into the main pipeline from the reservoir, through pressure regulation and flow regulation into the rain pipeline, shot to the surface of the car body through the nozzle, the ejected water is collected into the reservoir, after precipitation filtration, recycling. During the inspection, all doors and Windows are closed, and the driver drives the car in ...
