China Coating Equipment Suppliers – Auto automatic robot paint room – Jinming

Introduction

According to the properties of coating production, it can be divided into intermittent production and continuous production. Intermittent production spray room is mainly used for single or small batch of workpiece painting operation, can also be used for large batch of small workpiece painting operation. Its form according to the workpiece placement way has the table, the suspension type, the table mobile three. Intermittent production of spray room for semi-open, continuous production of spray room for a large number of workpiece painting operation, generally through the type, by hanging conveyor, rail car and ground conveyor and other transport machinery transport workpiece. Continuous production of spray room and paint pretreatment equipment, film curing equipment, transport machinery and other components of automatic painting production line, this kind of spray room, can be in the import and export of spray room with paint before preparation room and cool dry room (their role is in addition to dust. Play a buffer role, can also form a wind curtain in the entrance and exit of the spray room, to prevent spray paint mist into the workshop.

According to the airflow direction and suction mode in the spray room, it can be divided into four kinds: transverse air, longitudinal air, bottom air and upper and lower air. The indoor air direction is vertical with the moving direction of the workpiece in the horizontal plane. The vertical air is called transverse air and the moving direction of the workpiece. The direction of indoor airflow is vertical to the moving direction of the workpiece in the vertical plane, which is called the bottom exhaust and the lower exhaust, because it can form cesium fixed airflow. So it is the most commonly used structural form of spray paint room.

According to the treatment of paint mist can be divided into dry wet and oil treatment of three types. Dry type is direct capture, to filter materials or equipment to collect and reprocess the paint mist. Wet spray chamber is indirect capture, capture paint mist through water, and then treat the wastewater containing paint mist. Wet spray room is widely used in various spray painting operations in the production line spray room basically adopts this way. Oil – treated paint mist is captured by oil mist.

According to the way of catching paint mist in the spray room, it can also be divided into filter type, water curtain type and Venturi type (the principle of venturi effect is that when the wind blows through the barrier, the pressure near the port above the leeward side of the barrier is relatively low, resulting in adsorption and resulting in the flow of air. It can be used for ventilation of some mechanical components and buildings. In addition, there are open spray paint room and telescopic spray paint room, according to the size of the workpiece to support customization.

MRK series robots can be combined with a variety of workpiece transmission equipment, for customers of all shapes, all sizes of the workpiece to provide the best complete solution.

These include: additional rails for large items, 2-4 stations for chairs and small items, and other external work vehicles and rotating equipment.

The MRK robot of the same type can be equipped with mechanical arms of different lengths, which can achieve the spraying of different sizes of the workpiece, while maximizing the use of the spraying room.

Used for all kinds of workpiece painting, other models can be customized.