Auto Parts Coating Line Exporters – Hardware parts dusting production line – Jinming
Auto Parts Coating Line Exporters – Hardware parts dusting production line – Jinming Detail:
Working principle
Working principle: the workpiece powder spraying is electrostatic spraying, the scattered powder can be recovered and reused, so the powder recovery device is set on the side of the powder room. The system adopts the two-stage recovery mode of big cyclone + filter element, which is attracted by the exhaust fan. Some ultrafine powder is filtered when flowing through the filter element with the airflow, and then discharged from the workshop with the discharged air.
1. The powder spraying room is processed with galvanized steel plate of δ1.5mm, and the panels are connected with bolts after folding to ensure that the panels are smooth and crisp; D =120mm strip opening is arranged at the top of the chamber body to make the suspension conveying system run outside the chamber without being polluted by dust.
2. A set of lighting lamps is set on both sides of the powder chamber body, and the lamps are 40W×2 double tube triple anti-fluorescent lamp, which is installed on the top of the operating port.
The powder room is equipped with a set of recovery device, recovery method is big cyclone + filter dual-stage recovery, mainly including big cyclone, filter element, pulse solenoid valve and pulse controller, powder collection box, exhaust fan, etc.; Exhaust fan selection OF BTHF-№630A centrifugal fan, the main technical parameters of the fan: air volume 15500 m³/h, full pressure 2000Pa, speed 2900r/min, motor power 18.5kW.
3. Spraying device
Powder room is equipped with 2 sets of manual spraying machine, high voltage electrostatic spraying machine made in Shanghai spraying machine.
4. Powder room partition: (optional)
During powder spraying, the scattered dust will pollute the surrounding environment to some degree, so a powder room is set up to close and partition, and the workpiece passing through is made into a imitation door. The partition wall is arranged with appropriate glass Windows for lighting, and the partition wall is made of δ50mm rock wool sandwich color board and single layer color board, with beautiful appearance.
According to the workpiece size, other models can be customized.
Product detail pictures:
Related Product Guide:
We attempt for excellence, support the customers", hopes to become the top cooperation team and dominator enterprise for staff, suppliers and shoppers, realizes worth share and continual marketing for Auto Parts Coating Line Exporters – Hardware parts dusting production line – Jinming , The product will supply to all over the world, such as: Bangladesh, Belgium, Philadelphia, Good quality and reasonable price have brought us stable customers and high reputation. Providing 'Quality Products, Excellent Service, Competitive Prices and Prompt Delivery', we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We'll work whole-heartedly to improve our solutions and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.
By Mona from Islamabad - 2017.05.21 12:31
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Charlotte from Juventus - 2017.10.27 12:12
Related products
-
High Quality Small Workshop Dust Extraction ...
Basic principles The basic principle of zeolite wheel structure The concentration zone of zeolite runner can be divided into treatment zone, regeneration zone and cooling zone. The concentration runner runs continuously in each zone. VOC organic exhaust gas passes through the pre-filter and through the treatment area of the concentrator runner unit. In the treatment area, VOCs are removed by adsorbent adsorption, and the purified air is discharged from the treatment range of the co...
-
China Fume Dust Extractor Factory – RTO...
Introduction RT0 is also known as regenerative heating garbage incinerator, is a kind of environmental protection machinery that depends on heat energy to immediately ignite the waste gas, which can solve the waste gas in spraying, painting, packaging and printing, plastics, chemical plants, electrophoresis principle, spraying, electronic devices and other basically all fields. For the waste gas with the concentration value in the range of 100-3500mg /m3, RTO has the practical effect tha...
-
High Quality Coating Pretreatment Factories ...
Introduction According to the properties of coating production, it can be divided into intermittent production and continuous production. Intermittent production spray room is mainly used for single or small batch of workpiece painting operation, can also be used for large batch of small workpiece painting operation. Its form according to the workpiece placement way has the table, the suspension type, the table mobile three. Intermittent production of spray room for semi-open, continuous...
-
China Vacuum Dust Collector – Zeolite w...
Basic principles The basic principle of zeolite wheel structure The concentration zone of zeolite runner can be divided into treatment zone, regeneration zone and cooling zone. The concentration runner runs continuously in each zone. VOC organic exhaust gas passes through the pre-filter and through the treatment area of the concentrator runner unit. In the treatment area, VOCs are removed by adsorbent adsorption, and the purified air is discharged from the treatment range of the co...
-
High Quality Sublimation Coating Powder Supplie...
Introduction The equipment is used for the vehicle sealing inspection, rain, dry room for through type. The water is continuously pumped into the main pipeline from the reservoir, through pressure regulation and flow regulation into the rain pipeline, shot to the surface of the car body through the nozzle, the ejected water is collected into the reservoir, after precipitation filtration, recycling. During the inspection, all doors and Windows are closed, and the driver drives the car in ...
-
China Mechanical Dust Collector Supplier –...
Introduction Workshop is engaged in the production operation will poduce the harmful gas such as stimulation of pollutants, to nature ecology and plant environmental hazards can cause air pollution, waste gas emissions from the equipment will be collected, the use of activated carbon adsorption tower will be treated as waste gas to the air pollutant emission standards before discharge into the atmosphere, so as not to ause the harm of environment and staff. Activated carbon abs...
